SORT:Car Maintained Cleaner & Protector Series
NAME:ENGINE PROTECTOR FOR NEW CAR
DETAIL:
Product Efficacy
The content of special materials to avoids the service life which the engine early time wears causes dropping.
Is suitable for the new vehicle engine friction, can form molecular protective film in the metal surface, but changes the lubrication characteristic, enhances the wearing in effect, avoids in the new vehicle running –in period the engine having the accident.
Use Direction
This protector is suitable for new car with all gas oil, diesel fuel. Please add into one bottle of this cleaner when add fuel.
New Car Engine Interaction and maintenance suggestion
New car interaction, stomp first driving or break-in. it first must proceed a period time “ try running” when the new car or after motor vehicle major repair. Because the automobile parts from the factory (specially the parts there is friction by each other matching) though fine after picking, then apparently clean as a mirror, smooth and perfect, but could find out still very rude under a microscope, some surface has serrated even with thorn, under this situation, if use first period not take any measures, causing the wear is intensified, seriously effect the using life of car. At this interaction period, the car must be strictly followed this using rules of manufacturer for new car adjusted period.
So, in the interaction period, the car need conquer impatience and keep its temper, carefully driving as the request of interaction period, especially can’t remove ahead of time the limited speed equipment on the car, strictly following the rules of manufacturer to finish new car maintenance in the interaction period, this is absolutely benefit for your love car.
Technical Parameter
Project
|
Testing Result
|
Testing Way
|
Oil Appearance
|
Light yellow semi-transparent liquid
|
Eyes testing
|
Gravity d20 4g/cm3
|
0.903
|
GB-1884-83
|
water soluble acid and alkali
|
Not test anything with alkali things
|
GB-T260-92
|
Metal Self-Repairing compound content
|
Liquid molybdenum
|
Materials combination testing for form
|
total extreme-pressure and self-recover and anti-friction compound content
|
≥55%
|
Materials combination testing for form
|
the diameter of worn spot
|
D392N 60 minutes, mm(1200r/min.75℃) 0.79 qualified
|
SH/T 0189 -1992
|
PRODUCTS SPEC:258ml x 24pcs
PERIOD OF VALIDITY:2 years