SORT：Car Maintained Cleaner & Protector Series

NAME：AIR INTAKE VALVE CLEANER

DETAIL：

Product Efficacy

Concentrated solvent liquid type intake valve cleaner is a high-tech detergent which is      formulated to help reduce rough idle, cold engine operation, hesitation and lose of performance cause by dirty intake valve and throttle bodies.

Using Direction

This product could take primary flow meter device, so slow speed to adjust the flow of entering manifold, then using rubber tube hitch entrance manifold, as be slow speed flow to enter into manifold, launch engine to make fuel way to clean sludge and dirty, the emulsified sludge can be burned or thrown off by exhaust pipes.

Single pump pressure steel cleaning hanging bottle

Please use this cleaner combined with the pressure steel cleaning hanging bottle, which could clean carbon on the engine valve, improved the phenomenon of engine weakness, and lubricate the valve for air to enter, increased air currents action smooth. Especially for vehicles with larger fuel oil pressure, the effect could be better.

Technical Parameter

Project	Testing Result	Testing Way
Appearance	Light yellow raw material, have volatility and combustibility	Eyes Testing
Gravity d20 4g/cm3	0.875	GB-1884-82=3
Flash point ℃(Closed entrance)	Not lower than 100℃	GB-261-83
acid alkali soluble in water	Not test anything with alkali	GB-T260-92
aromatic hydrocarbon contents Vol.% min	Aromatic Contents. Vol. 20% min	GB-/T2361-92
insoluble solids contents	1.5-2.5% for total vol.
Corrosion Testing 55℃ 7days	Stainless steel:  12 hours / no response / qualified Sheet Cooper: 12 hours / no response / qualified Aluminum alloy: 12 hours / no response / qualified	GB-6141-85
Odor	Middle class odor like dim ethyl benzene taste

PRODUCTS SPEC：350ml x 24pcs

PERIOD OF VALIDITY：2 years